Categories
General Home experiments Observations Science history

Up in the air with a Pure Over Brewer

The diffuser sitting on top of the Pure Over coffee brewer. The holes are to ensure that the water falls evenly and slowly onto the grounds below.

The Pure Over is a new type of coffee brewer that is designed to brew filter coffee without the need for disposable paper filters. The brewer, which is completely made of glass, is a perfect size for brewing one cup of coffee and, as promised, makes a lovely cup without the need for wasteful paper filters. Generally, for 1-cup filter coffees, the Pure Over has become my go-to brewing method, although it does have a few idiosyncrasies to it that are helpful to be aware of while brewing.

An advantage of this brewing device is that it provides a large number of opportunities for physics-watching, including a peculiar effect that connects brewing coffee to an air balloon crash into the garden of a London Coffee House. It concerns a feature of the Pure Over that is specific to this particular brewing device: the ‘diffuser’ that sits on top of it.

The glass diffuser has five small holes at the bottom of it which are designed to reduce the flow of the water onto the coffee bed so that it is slower and more gentle. In order to avoid the paper filters, the Pure Over features a filter made of holes in the glass at its base. This filter does surprisingly well at keeping the coffee grounds out of the final brew, but it works best if the coffee bed just above it is not continuously agitated. The idea of the diffuser is that the coffee grounds are more evenly exposed to the water, with the grounds closest to the filter being least disturbed and so the coffee is extracted properly.

As water is poured from a kettle through the diffuser, the water builds up in the diffuser forming a pool that slowly trickles through the holes. Initially this process proceeds steadily, the water is poured from the kettle into the diffuser and then gently flows through and lands on the coffee. At one point however, the pressure of the steam within the main body of the brewer builds until it is enough to push the glass diffuser up a bit, the steam escapes and the diffuser ‘clunks’ back onto its base on top of the pure over. Then, this happens again, and again, until there is a continuous rattle as the steam pressure builds, escapes and builds once more.

The ideal gas laws, such as that found by Jacques Charles, relate the volume and pressure of a gas to its temperature. The application of the laws helped to improve the design of steam engines such as this Aveling and Porter Steam Roller that has been preserved in central Kuala Lumpur, Malaysia.

The pressure of the steam builds until the force exerted upwards by the rising steam is greater than the weight of gravity pulling the diffuser down. Once enough gas escapes, the pressure is reduced and so the steam no longer keeps the diffuser aloft which consequently drops with a clunk. The motion could take our thoughts to pistons, steam engines and the way that this steam movement was once exploited to drive our industrial revolution. Or you could go one stage earlier, and think about the gas laws that were being developed shortly before. There’s Boyle’s Law which relates the pressure of a gas to its volume (at constant temperature). That would perhaps partially explain the behaviour of the pure over. But then there’s also Jacques Charles and his observation that the volume of a gas is proportional to its temperature (at constant pressure). This too has relevance for the pure over because as we pour more water in from the kettle, we warm the entire pure-over body and so the temperature of the gas inside will increase. Consequently, as the amount of hot water in the pure over increases, the temperature goes up, the volume of that gas would increase but is stopped by the diffuser acting as a lid. This leads to the pressure of the gas increasing (Boyle) until the force upwards is high enough, the diffuser lid rises upwards on the steam which escapes leading the pressure to once again drop and the diffuser top to go clunk and the whole cycle begins again.

Of course, we know that Boyle’s law is appropriate for constant temperature and Charles’s law is appropriate for constant pressure and so the laws are combined together with the Gay-Lussac/Amonton law into the ideal gas laws which explain all manner of things from cooling aerosols to steam engine pistons. And yet, they have another connection, which also links back to our pure over, which is the history of hot air balloons.

Charles discovered his law in around 1787, a few years after the first non-tethered hot air balloon ascent, in Paris, in June of 1783. The hot air balloon is a good example of the physics that we can see in the pure over. Although Charles must have suspected some of the physics of the hot air balloon in June, he initially decided to invent his own, hydrogen filled balloon which he used to ascend 500 m in December of 1783. Hydrogen achieves its lift because hydrogen is less dense than air at the same temperature. However, it is the hydrogen balloon that links back to coffee and coffee in London.

hot air balloon
The ideal gas laws also contribute to our understanding of the operation of hot air balloons. We are familiar with them now, but how would such an object have been perceived by observers at the time of the first flights?

The first balloon flight in England took place using a hydrogen, not a hot-air, balloon in 1785. The balloon was piloted by Vincenzo Lunardi who was accompanied by a cat, a dog and, for a short while, a pigeon (before it decided to fly away). But it was not this successful flight that connects back to coffee, it was his maiden flight on 13 May 1785. On that day, Lunardi took off from the Honourable Artillery Company grounds in Moorgate, flew for about 20 minutes and then crashed, or as they said at the time “fell with his burst balloon, and was but slightly injured”(1) into the gardens of the Adam and Eve Coffee House on the junction of Hampstead Road and, what is now, Euston Road. In the 1780s the Adam and Eve coffee house had a large garden that was the starting point for walks in the country (in the area now known as Somers Town)(2). Imagine the scene as, quietly appreciating your tea or coffee, a large flying balloon crashes into the garden behind you.

The Adam and Eve is no longer there, in fact, its original location now seems to be the underpass at that busy junction, and the closest coffee house is a branch of Beany Green. However there is one, last coffee connection and it brings us back to the pure over. The pressure of the steam under the diffuser needs to build until the upwards force of the steam can overcome the gravitational force down of the weight of the glass diffuser. In the same way Lunardi had to have enough lift from the hydrogen balloon to compensate for the weight of the balloon and its passengers. Lunardi had wanted to be accompanied by another human on the day of his successful flight. Unfortunately, the mass of two humans in a balloon was too much for the balloon to accommodate which is why, the human was replaced by the dog, the cat and the pigeon.

Which may go some way to illustrate how far the mind can travel while brewing a cup of coffee, particularly with a brew device as full of physics as the Pure Over.

1 London Coffee Houses, Bryant Lillywhite, George Allen and Unwin publishers, 1963

2 The London Encyclopaedia (3rd edition), Weinreb, Hibbert, Keay and Keay, MacMillan, 2008