Categories
Home experiments Observations slow

Something brewing in my V60

kettle, V60, spout, pourover, v60 preparation
The new V60 “power kettle”

It was my birthday a short while ago and someone who knows me well got me a perfect present: a kettle specially adapted for making pour-over V60 style coffees. Until this point I had been struggling with a normal kettle with it’s large spout but now, I can dream that I pour like a barista. Of course, it is important to try out your birthday present as soon as you receive it. And then try it again, and again, just to make sure that it does really make a difference to your coffee. So it is fair to say, that recently I have been enjoying some very good coffees prepared with a variety of lovely beans from Roasting House and my new V60/V60 kettle combination.

Spending the time to prepare a good coffee seems to make it even more enjoyable (though it turns out that whether you agree with this partly depends on why you are drinking coffee). Grinding the beans, rinsing the filter, warming the pot, the whole process taken slowly adds to the experience. But then, while watching the coffee drip through the filter one day, I saw a coffee drop dance over the surface of the coffee. Then another one, and another, a whole load of dancing droplets (video below). Perhaps some readers of Bean Thinking may remember a few months back a similar story of bouncing droplets on soapy water. In that case, fairly large drops of water (up to about 1cm wide) were made to ‘float’ on the surface of a dish of water that had been placed on a loudspeaker.

Sadly, for that initial experiment the coffee had been made undrinkable by adding soap to it. The soap had the effect of increasing the surface viscosity of the droplets which meant that the drop could bounce back from the vibrating water surface before it recombined with the liquid. Adding soap to the coffee meant that these liquid drops could ‘float’ (they actually bounce) on the water for many minutes or even longer (for more of the physics behind this click here).

science in a V60
A still from the video above showing three drops of coffee on the surface.

On the face of it, there are some similarities between the drops dancing on the coffee in my V60 and these bouncing droplets. As each drop falls from the filter, it creates a vibration on the surface of the coffee. The vibration wave is then reflected back at the edges of the V60 and when the next drop falls from the filter it is ‘bounced’ back up by the vibration of the coffee.

But there are also significant differences. Firstly, as mentioned, there was no soap added to this coffee (I was brewing it to drink it!). This means that the viscosity of the drops should be similar to that of ordinary water. Although water drops can be made to bounce, the reduced viscosity means that this is less likely. Secondly, the water is hot. This acts to reduce the viscosity still further (think of honey on hot toast). Perhaps other effects (such as an evaporation flux or similar) could be having an effect, but it is noticeable that although the drops “live” long enough to be caught on camera, they are not very stable. Could it be that the vibrations caused by the droplets hitting the coffee are indeed enough to bounce the incoming droplets back up but that, unlike the soapy-water, these “anti-bubbles” do not survive for very long? Or is something deeper at play? I admit that I do not know. So, over to you out there. If you are taking time to make coffee in a V60, why not keep an eye out for these bouncing droplets and then do some experiments with them. Do you think that the bounce vibration is enough to sustain the bouncing droplet – does the speed of pour make a difference? Is it associated with the heat of the coffee? I’d be interested to hear what you think.

(The original soapy-coffee bouncing droplet video).

If you see anything interesting or odd in your coffee, why not let me know, either here in the comments section below, e-mail, or over on Twitter or on Facebook.